< All Topics
Print

Linksys Router Hotspot Transition

Linksys Router Hotspot Transition: Here is a Step-by-Step Guide to Change a Linksys Broadband Router from a Traditional ISP to a Mobile Phone Hotspot

Transitioning your Linksys broadband router from a traditional ISP to a mobile phone hotspot involves several configuration changes. Follow these detailed steps to ensure a smooth transition:

Step 1: Prepare Equipment

First, gather all the necessary equipment:

  • Linksys broadband router
  • Mobile phone with hotspot capability
  • Computer or smartphone for configuration
  • Ethernet cable

Step 2: Disconnect the Router from the Traditional ISP

Next, disconnect your router from the traditional ISP:

  1. Turn off the router.
  2. Disconnect the Ethernet cable from the router’s WAN (Internet) port that connects to your ISP modem.

Step 3: Connect Your Router to a Computer

After disconnecting from the ISP, connect your router to a computer:

  1. Connect an Ethernet cable from one of the router’s LAN (numbered) ports to your computer’s Ethernet port.
  2. Power on the router and your computer.

Step 4: Access the Router’s Configuration Page

Now, access the router’s configuration page:

  1. Open a web browser on your computer.
  2. Enter the router’s IP address in the address bar. The default IP address is usually 192.168.1.1 or 192.168.0.1.
  3. Log in to the router using the default username and password. Typically, the default username is admin, and the default password is either admin or left blank.

Step 5: Enable the Mobile Hotspot on Your Phone

Then, set up your mobile hotspot:

  1. Turn on the mobile hotspot feature on your phone.
  2. Note the SSID (network name) and password of your mobile hotspot.

Step 6: Configure the Router to Connect to the Mobile Hotspot

Next, configure the router to use your mobile hotspot:

  1. Go to the “Wireless” section in the router’s configuration page.
  2. Select “Basic Wireless Settings”.
  3. Set the “Wireless Network Mode” to match your hotspot’s network mode (usually Mixed or Auto).
  4. Find and select the SSID (network name) of your mobile hotspot in the “Wireless Network Name (SSID)” field.
  5. Enter the mobile hotspot’s password in the “Wireless Security” section.

Step 7: Change the Router’s WAN/Internet Settings

After configuring the wireless settings, update the router’s WAN/Internet settings:

  1. Go to the “Setup” or “Internet” section of the router’s configuration page.
  2. Change the “Internet Connection Type” to “Automatic Configuration – DHCP” or “Static IP” if required by your mobile hotspot.
  3. Ensure the router uses the mobile hotspot as its internet source.

Step 8: Save and Reboot

Subsequently, save your settings and reboot the router:

  1. Save all the settings you have configured.
  2. Reboot the router to apply the new settings.

Step 9: Test the Connection

Finally, test the connection to ensure everything is set up correctly:

  1. Disconnect the Ethernet cable from your computer.
  2. Connect your computer or any device to the Linksys router’s Wi-Fi network.
  3. Test the internet connection by opening a web browser and visiting a website.

Linksys Router Hotspot Transition Tips

  • Connecting your IoT devices to your Linksys Router
  • Place your mobile phone close to the router to ensure a strong Wi-Fi signal.
  • Monitor data usage if your mobile plan has a data limit.
  • Secure your router by changing the default username and password to prevent unauthorized access.

By following these steps, you will successfully change your Linksys broadband router from using a traditional ISP to a mobile phone hotspot. If you encounter any issues, refer to the router’s manual or the Linksys support website for additional troubleshooting steps.

CyberFraud Prevention, Vulnerability Risk and Security Operations Best Practices https://www.linkedin.com/groups/
CyberFraud Prevention, Vulnerability Risk and Security Operations Best Practices https://www.linkedin.com/groups/
Table of Contents